{"product_id":"mathews-lowpro-short-draw-sd-detachable-quiver","title":"Mathews LowPro Short Draw (SD) Detachable Quiver","description":"\n\u003cp\u003eThe \u003cstrong\u003eMathews LowPro Short Draw (SD) Detachable Quiver\u003c\/strong\u003e brings Mathews' streamlined, close-to-riser LowPro design to archers shooting shorter draw lengths and shorter arrows. Developed to solve fletching-clearance issues common with short-arrow setups, the LowPro SD features a shortened configuration that provides additional clearance around the lower arrow-retention arm while keeping arrows securely positioned on the bow.\u003c\/p\u003e\n\n\u003cp\u003eFeaturing a quick, quiet detachable mounting system and the integrated balance-focused design of the LowPro platform, this quiver is a practical accessory for shorter-draw bowhunters who want the functionality of a premium Mathews quiver without unwanted vane interference. It is especially relevant for properly fitted compact hunting bows, including short-draw configurations of the Mathews SOLACE.\u003c\/p\u003e\n\n\u003ch2\u003eImportant: Check Your Arrow Length Before Ordering\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMathews recommends the LowPro SD Quiver when the distance from the tip of your arrow to the beginning of the vanes is less than 23 inches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Short Draw version accommodates arrows with a tip-to-vane measurement as short as 21 inches.\u003c\/p\u003e\n\n\u003cp\u003eTo determine whether you need the SD configuration:\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eTake one of the completed arrows you intend to carry in the quiver.\u003c\/li\u003e\n\u003cli\u003eMeasure from the tip of the arrow to the beginning of the vanes.\u003c\/li\u003e\n\u003cli\u003eIf that measurement is less than 23 inches, select the LowPro SD rather than assuming the standard LowPro will provide enough clearance.\u003c\/li\u003e\n\u003cli\u003eConfirm that the measurement is at least 21 inches, which is Mathews' published minimum for the SD.\u003c\/li\u003e\n\u003cli\u003eVerify vane, broadhead, and mounting clearance after installing the quiver.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eMeasurement Note:\u003c\/strong\u003e This is not the same as carbon-to-carbon arrow shaft length, draw length, or a nock-to-point measurement. Mathews specifically uses the distance from the arrow tip to the beginning of the vanes to determine LowPro SD fitment.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch3\u003ePurpose-Built for Shorter Draw Lengths and Arrows\u003c\/h3\u003e\n\u003cp\u003eThe defining feature of the Mathews LowPro Short Draw Detachable Quiver is its shortened configuration.\u003c\/p\u003e\n\n\u003cp\u003eArchers with shorter draw lengths commonly shoot shorter arrows. Depending on the quiver design, this can position the fletching close to the lower arrow-retention arm.\u003c\/p\u003e\n\n\u003cp\u003eWithout adequate clearance, the vanes may contact the quiver's retention components when arrows are installed or removed.\u003c\/p\u003e\n\n\u003cp\u003eMathews developed the LowPro SD specifically to address this issue while retaining the design advantages of its standard LowPro platform.\u003c\/p\u003e\n\n\u003cp\u003eRather than requiring shorter-draw shooters to accept compromised arrow positioning, the SD offers geometry better suited to their equipment.\u003c\/p\u003e\n\n\u003ch3\u003eImproved Fletching Clearance\u003c\/h3\u003e\n\u003cp\u003eThe LowPro SD features a shorter arrangement designed to create more room around the arrow vanes and lower retention arm.\u003c\/p\u003e\n\n\u003cp\u003eThis helps prevent unwanted vane contact when using shorter hunting arrows.\u003c\/p\u003e\n\n\u003cp\u003eFor bowhunters shooting larger vane profiles, offset fletching, or helical configurations, proper clearance can be an important part of choosing a quiver.\u003c\/p\u003e\n\n\u003cp\u003eThe shortened design is intended to help address that clearance concern, but compatibility should still be checked using the actual finished arrows.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSetup Tip:\u003c\/strong\u003e Install all arrows and inspect their fletching with the quiver mounted on the bow. Make sure the vanes do not bind against the retention arm or other quiver components.\u003c\/p\u003e\n\n\u003ch3\u003eFits Tip-to-Vane Measurements Down to 21 Inches\u003c\/h3\u003e\n\u003cp\u003eMathews specifies that the LowPro SD accommodates arrows with a minimum measurement of 21 inches from the arrow tip to the beginning of the vanes.\u003c\/p\u003e\n\n\u003cp\u003eFor arrows measuring less than 23 inches using this method, Mathews identifies the SD as the required LowPro configuration.\u003c\/p\u003e\n\n\u003cp\u003eThis creates a useful fitment range for archers whose arrows are too short for proper clearance with the standard LowPro design.\u003c\/p\u003e\n\n\u003cp\u003eFor arrow configurations below the published 21-inch minimum, fitment should not be assumed.\u003c\/p\u003e\n\n\u003ch3\u003eQuick and Quiet Detachable Design\u003c\/h3\u003e\n\u003cp\u003eLike the standard LowPro Detachable Quiver, the SD incorporates a removable mounting arrangement designed for quick, quiet operation.\u003c\/p\u003e\n\n\u003cp\u003eThis gives hunters the flexibility to keep the quiver installed during the hunt or remove it after reaching their hunting position.\u003c\/p\u003e\n\n\u003cp\u003eFor example, some treestand or saddle hunters prefer shooting with the quiver removed, while others prefer maintaining the same bow balance throughout the hunt.\u003c\/p\u003e\n\n\u003cp\u003eThe detachable design allows the hunter to choose the setup that works best for their application.\u003c\/p\u003e\n\n\u003ch3\u003eClose-to-Riser Mounting\u003c\/h3\u003e\n\u003cp\u003eMathews developed the LowPro platform to keep arrows positioned close to the riser.\u003c\/p\u003e\n\n\u003cp\u003eRather than extending the quiver farther away from the bow than necessary, the LowPro mounting system is designed to integrate closely with compatible Mathews hunting bow geometry.\u003c\/p\u003e\n\n\u003cp\u003eThis close-fitting arrangement can help reduce unnecessary accessory bulk and support Mathews' in-line balance philosophy.\u003c\/p\u003e\n\n\u003cp\u003eFor shorter-draw archers, the SD version retains this mounting approach while improving clearance for shorter arrows.\u003c\/p\u003e\n\n\u003ch3\u003eDesigned for In-Line Balance\u003c\/h3\u003e\n\u003cp\u003eThe positioning of a loaded quiver can affect how a bow balances in the shooter's hand.\u003c\/p\u003e\n\n\u003cp\u003eMathews designed the LowPro series to carry arrows close to the bow's riser, reducing how far the arrow load is positioned away from the bow.\u003c\/p\u003e\n\n\u003cp\u003eThis can be especially useful for hunters who prefer shooting with their quiver installed.\u003c\/p\u003e\n\n\u003cp\u003eThe final balance of the bow will depend on the sight, rest, stabilizers, arrow weight, and other installed accessories.\u003c\/p\u003e\n\n\u003cp\u003eWhen setting up a hunting bow, we recommend evaluating balance with the quiver both installed and removed.\u003c\/p\u003e\n\n\u003ch3\u003eEngineered to Minimize Vibration\u003c\/h3\u003e\n\u003cp\u003eMathews designed the LowPro system with a focus on secure arrow positioning, close integration, and reduced vibration.\u003c\/p\u003e\n\n\u003cp\u003eA properly installed quiver should retain arrows without unnecessary movement during normal hunting use.\u003c\/p\u003e\n\n\u003cp\u003eSecure arrow retention is especially important when walking through thick cover, climbing into a stand, or moving between hunting locations.\u003c\/p\u003e\n\n\u003cp\u003eAlways check the mounting mechanism and arrow retention before heading into the field.\u003c\/p\u003e\n\n\u003ch3\u003eSecure Arrow Retention\u003c\/h3\u003e\n\u003cp\u003eThe SD retains the functionality of the standard LowPro platform while incorporating geometry better suited to shorter arrow configurations.\u003c\/p\u003e\n\n\u003cp\u003eIts retention design is intended to keep arrows securely positioned without unwanted interference around the lower retention arm.\u003c\/p\u003e\n\n\u003cp\u003eShorter arrows should be checked individually to confirm proper placement, secure grip, and clearance around the fletching.\u003c\/p\u003e\n\n\u003cp\u003eArrow diameter and the specific fletching arrangement can influence how the complete setup fits.\u003c\/p\u003e\n\n\u003ch3\u003eA Practical Match for the Mathews SOLACE\u003c\/h3\u003e\n\u003cp\u003eThe LowPro SD is particularly relevant for archers setting up the Mathews SOLACE, a premium hunting bow designed around shorter draw lengths and lighter draw weights.\u003c\/p\u003e\n\n\u003cp\u003eBecause shorter draw lengths frequently result in shorter finished arrows, the SD may provide the clearance needed for certain SOLACE arrow configurations.\u003c\/p\u003e\n\n\u003cp\u003eHowever, not every SOLACE shooter automatically needs the SD.\u003c\/p\u003e\n\n\u003cp\u003eThe correct decision should be based on the measured tip-to-vane distance of the actual arrows being used.\u003c\/p\u003e\n\n\u003cp\u003eThis same principle applies to other compatible Mathews bows configured for shorter-draw archers.\u003c\/p\u003e\n\n\u003ch3\u003eRight-Hand and Left-Hand Configurations\u003c\/h3\u003e\n\u003cp\u003eThe Mathews LowPro Short Draw Detachable Quiver is offered in right-handed and left-handed configurations.\u003c\/p\u003e\n\n\u003cp\u003eChoose the version that matches your bow and intended mounting arrangement.\u003c\/p\u003e\n\n\u003cp\u003eHandedness should be verified along with the hood finish before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eMultiple Hood Finish Options\u003c\/h3\u003e\n\u003cp\u003eMathews offers the LowPro SD with multiple hood-finish options, allowing shooters to coordinate the quiver with their bow.\u003c\/p\u003e\n\n\u003cp\u003eAvailable finishes may include solid and camouflage options depending on current manufacturer inventory.\u003c\/p\u003e\n\n\u003cp\u003eSelect the exact finish and handedness combination offered for the product rather than assuming every color is available in every configuration.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's Built For\u003c\/h2\u003e\n\n\u003cp\u003eThe Mathews LowPro Short Draw Detachable Quiver is designed for bowhunters who use shorter arrows and need improved clearance around the lower quiver retention arm.\u003c\/p\u003e\n\n\u003cp\u003eIt is particularly well suited for archers who:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eHave shorter draw lengths and use correspondingly shorter hunting arrows.\u003c\/li\u003e\n\u003cli\u003eMeasure less than 23 inches from the arrow tip to the beginning of the vanes.\u003c\/li\u003e\n\u003cli\u003eNeed a LowPro configuration accommodating measurements as short as 21 inches.\u003c\/li\u003e\n\u003cli\u003eExperience fletching-clearance concerns with standard-length quivers.\u003c\/li\u003e\n\u003cli\u003eWant a detachable quiver that can be removed quickly and quietly.\u003c\/li\u003e\n\u003cli\u003ePrefer arrows positioned close to the bow riser.\u003c\/li\u003e\n\u003cli\u003eWant the balanced, streamlined design of the Mathews LowPro platform.\u003c\/li\u003e\n\u003cli\u003eHunt whitetails from treestands, saddles, or ground blinds.\u003c\/li\u003e\n\u003cli\u003eAre setting up a Mathews SOLACE or another compatible shorter-draw hunting bow.\u003c\/li\u003e\n\u003cli\u003eWant to choose their quiver based on actual arrow dimensions rather than draw length alone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor shooters with longer arrows that provide adequate clearance in the standard LowPro, the regular LowPro Detachable may be appropriate.\u003c\/p\u003e\n\n\u003cp\u003eFor hunters primarily interested in a slimmer hood profile for compatible two- and three-blade mechanical broadheads, the LowPro Slim Detachable addresses a different equipment requirement.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ch3\u003eMathews LowPro Short Draw (SD) Detachable Quiver Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMathews Archery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eLowPro Short Draw (SD) Detachable Quiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Year\u003c\/td\u003e\n\u003ctd\u003e2027\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHunting Bow Quiver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuiver Design\u003c\/td\u003e\n\u003ctd\u003eShort Draw \/ Short Arrow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Style\u003c\/td\u003e\n\u003ctd\u003eLow-Profile Detachable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Feature\u003c\/td\u003e\n\u003ctd\u003eImproved Fletching Clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance Location\u003c\/td\u003e\n\u003ctd\u003eLower Arrow-Retention Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard LowPro Fitment Threshold\u003c\/td\u003e\n\u003ctd\u003eSD Required Below 23\" Tip to Vane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Supported Measurement\u003c\/td\u003e\n\u003ctd\u003e21\" Tip to Vane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArrow Retention\u003c\/td\u003e\n\u003ctd\u003eSecure LowPro Retention Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuiver Removal\u003c\/td\u003e\n\u003ctd\u003eQuick and Quiet Detachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArrow Positioning\u003c\/td\u003e\n\u003ctd\u003eClose to Bow Riser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandedness\u003c\/td\u003e\n\u003ctd\u003eRight Hand \/ Left Hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHood Finish\u003c\/td\u003e\n\u003ctd\u003eConfiguration Dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBow Compatibility\u003c\/td\u003e\n\u003ctd\u003eCompatible Mathews LowPro Platforms; Confirm Exact Model and Mounting Setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Listed Price\u003c\/td\u003e\n\u003ctd\u003e$259.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003eSpecifications are based on Mathews' published LowPro Short Draw Detachable Quiver information. The manufacturer states that arrows measuring less than 23 inches from tip to vane require the SD, with a minimum supported tip-to-vane distance of 21 inches. Confirm arrow dimensions, handedness, mounting compatibility, and finish before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eLowPro Short Draw vs. Standard LowPro Detachable\u003c\/h2\u003e\n\n\u003cp\u003eThe LowPro SD and standard LowPro Detachable are based on the same low-profile quiver concept, but they are designed for different arrow-length requirements.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eLowPro Short Draw SD\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eStandard LowPro Detachable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eShorter Arrows\u003c\/td\u003e\n\u003ctd\u003eStandard-Length Arrows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetachable\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-Profile Mounting\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClose-to-Riser Design\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Retention Arm Clearance\u003c\/td\u003e\n\u003ctd\u003eOptimized for Shorter Arrows\u003c\/td\u003e\n\u003ctd\u003eStandard Configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip-to-Vane Below 23\"\u003c\/td\u003e\n\u003ctd\u003eRequired by Mathews\u003c\/td\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Published Tip-to-Vane Fit\u003c\/td\u003e\n\u003ctd\u003e21\"\u003c\/td\u003e\n\u003ctd\u003eNot Specified Here\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuick and Quiet Removal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhich should you choose?\u003c\/strong\u003e Measure from your arrow tip to the beginning of the vanes. If the measurement is less than 23 inches but at least 21 inches, the LowPro SD is the manufacturer-specified configuration. With longer arrows, the standard LowPro may provide adequate clearance, subject to the rest of your bow setup.\u003c\/p\u003e\n\n\u003ch2\u003eLowPro Short Draw vs. LowPro Slim Detachable\u003c\/h2\u003e\n\n\u003cp\u003eAlthough the names sound similar, the Mathews LowPro Short Draw and LowPro Slim are designed to address different equipment requirements.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eLowPro SD Detachable\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eLowPro Slim Detachable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Purpose\u003c\/td\u003e\n\u003ctd\u003eShort-Arrow Vane Clearance\u003c\/td\u003e\n\u003ctd\u003eNarrower Quiver Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey Design Feature\u003c\/td\u003e\n\u003ctd\u003eShortened Quiver Geometry\u003c\/td\u003e\n\u003ctd\u003e22% Slimmer Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBroadhead Focus\u003c\/td\u003e\n\u003ctd\u003eNot Limited to a Slim-Specific Broadhead Category in Published Description\u003c\/td\u003e\n\u003ctd\u003e2- and 3-Blade Mechanicals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetachable Design\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClose-to-Riser Mounting\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Fitment Check\u003c\/td\u003e\n\u003ctd\u003eArrow Tip-to-Vane Length\u003c\/td\u003e\n\u003ctd\u003eBroadhead Hood Clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhich should you choose?\u003c\/strong\u003e The SD is designed for archers whose shorter arrows require additional lower-retention-arm clearance. The Slim is designed for hunters who use compatible mechanical broadheads and want a narrower quiver profile.\u003c\/p\u003e\n\n\u003cp\u003eThe two designs are not interchangeable solutions. A slimmer hood does not automatically create the lower-retention-arm clearance provided by the Short Draw.\u003c\/p\u003e\n\n\u003ch2\u003eOur Take on the Mathews LowPro Short Draw Detachable Quiver\u003c\/h2\u003e\n\n\u003cp\u003eAt Extreme Outfitters, we spend a lot of time helping archers match accessories to their actual bow and arrow configurations.\u003c\/p\u003e\n\n\u003cp\u003eOne thing that often gets overlooked when selecting a quiver is the length of the finished hunting arrows.\u003c\/p\u003e\n\n\u003cp\u003eSomeone with a shorter draw length may have a bow that fits perfectly, but their arrows can create clearance problems with a quiver designed around longer setups.\u003c\/p\u003e\n\n\u003cp\u003eThat's what makes the Mathews LowPro SD a useful addition to the lineup.\u003c\/p\u003e\n\n\u003cp\u003eRather than treating every archer as though they're shooting the same arrow length, Mathews designed a shortened LowPro specifically to improve clearance around the lower arrow-retention arm.\u003c\/p\u003e\n\n\u003cp\u003eThe published fitment guidance is particularly useful. If your arrow measures less than 23 inches from the tip to the start of the vanes, Mathews identifies the SD as the correct configuration, with a minimum supported measurement of 21 inches.\u003c\/p\u003e\n\n\u003cp\u003eWe think that measurement is the most important information to understand before purchasing.\u003c\/p\u003e\n\n\u003cp\u003eWe also like that Mathews retained the detachable LowPro design. Some bowhunters prefer leaving their quiver mounted, while others remove it once they reach their treestand or ground blind.\u003c\/p\u003e\n\n\u003cp\u003eThe close-to-riser mounting concept is another practical feature. Quiver position affects the balance of the complete bow, and keeping the arrow load close to the riser can help create a streamlined setup.\u003c\/p\u003e\n\n\u003cp\u003eFor archers setting up the Mathews SOLACE, the SD is particularly worth considering because the bow is designed around shorter draw lengths.\u003c\/p\u003e\n\n\u003cp\u003eHowever, we wouldn't automatically recommend the SD to every SOLACE owner. The correct decision should be based on the dimensions of their actual finished arrows.\u003c\/p\u003e\n\n\u003cp\u003eWe would also be careful not to confuse the SD with the new LowPro Slim. The Slim is focused on reducing the quiver's profile for compatible mechanical broadheads, while the SD is focused on accommodating shorter arrows without vane interference.\u003c\/p\u003e\n\n\u003cp\u003eFor shorter-draw bowhunters who want a premium detachable Mathews quiver and need more clearance around their fletching, the LowPro Short Draw is a strong option.\u003c\/p\u003e\n\n\u003cp\u003eOur recommendation is to measure the arrow correctly, verify the bow's mounting compatibility, and test arrow retention and vane clearance with the quiver installed before heading into the field.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the Mathews LowPro Short Draw Detachable Quiver?\u003c\/h3\u003e\n\u003cp\u003eIt is a shortened version of Mathews' LowPro Detachable Quiver designed for shorter-draw archers using shorter arrows. Its main benefit is improved fletching clearance around the lower arrow-retention arm.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does SD stand for?\u003c\/h3\u003e\n\u003cp\u003eSD stands for Short Draw. The name identifies the quiver's shorter configuration designed around shorter arrow setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know if I need the LowPro SD?\u003c\/h3\u003e\n\u003cp\u003eMeasure from the tip of your completed arrow to the beginning of the vanes. Mathews states that arrows measuring less than 23 inches using this method require the SD.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the minimum arrow measurement for the SD Quiver?\u003c\/h3\u003e\n\u003cp\u003eMathews lists a minimum tip-to-vane measurement of 21 inches for the LowPro SD.\u003c\/p\u003e\n\n\u003ch3\u003eIs the 21-inch measurement carbon-to-carbon arrow length?\u003c\/h3\u003e\n\u003cp\u003eNo. Mathews measures from the arrow tip to the beginning of the vanes. This is different from carbon-to-carbon shaft length, draw length, or nock-to-point measurement.\u003c\/p\u003e\n\n\u003ch3\u003eWhy does arrow length matter when choosing a quiver?\u003c\/h3\u003e\n\u003cp\u003eOn shorter arrows, the fletching can sit too close to the lower arrow-retention arm of certain quivers. The SD's shortened geometry is designed to provide additional clearance and reduce unwanted vane contact.\u003c\/p\u003e\n\n\u003ch3\u003eWill the LowPro SD work with the Mathews SOLACE?\u003c\/h3\u003e\n\u003cp\u003eThe SD is particularly relevant for SOLACE setups using shorter arrows. Confirm the exact mounting configuration and measure the finished arrow from tip to vane to determine whether the SD is required.\u003c\/p\u003e\n\n\u003ch3\u003eDo all short-draw archers need an SD Quiver?\u003c\/h3\u003e\n\u003cp\u003eNo. The deciding factor is the finished arrow's tip-to-vane measurement, not draw length by itself. Some shorter-draw archers use arrows long enough for the standard LowPro.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the LowPro SD detach?\u003c\/h3\u003e\n\u003cp\u003eYes. It retains the detachable LowPro design for quick, quiet removal.\u003c\/p\u003e\n\n\u003ch3\u003eCan I leave the LowPro SD mounted while shooting?\u003c\/h3\u003e\n\u003cp\u003eThe quiver is designed to remain securely mounted during normal use. Whether to shoot with the quiver installed or removed comes down to personal preference and the balance of the complete setup.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the SD improve bow balance?\u003c\/h3\u003e\n\u003cp\u003eIt incorporates Mathews' LowPro close-to-riser mounting philosophy, intended to support in-line balance and minimize vibration. Actual balance depends on the bow, arrows, and other installed accessories.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's the difference between the LowPro SD and LowPro Slim?\u003c\/h3\u003e\n\u003cp\u003eThe SD uses shortened geometry to accommodate shorter arrows and improve vane clearance. The Slim focuses on a narrower hood profile designed for compatible two- and three-blade mechanical broadheads.\u003c\/p\u003e\n\n\u003ch3\u003eIs the LowPro SD the same as the standard LowPro Detachable?\u003c\/h3\u003e\n\u003cp\u003eNo. Although both use the LowPro detachable concept, the SD is specifically shortened to address the clearance needs of shorter arrow configurations.\u003c\/p\u003e\n\n\u003ch3\u003eIs the SD Quiver available for left-handed bows?\u003c\/h3\u003e\n\u003cp\u003eYes. Mathews offers right-handed and left-handed configurations.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the LowPro SD come in different colors?\u003c\/h3\u003e\n\u003cp\u003eMathews offers multiple hood-finish selections. Available combinations depend on current manufacturer and dealer inventory.\u003c\/p\u003e\n\n\u003ch3\u003eWill the LowPro SD fit every Mathews bow?\u003c\/h3\u003e\n\u003cp\u003eCompatibility should not be assumed across every Mathews model. Confirm that your exact bow supports the LowPro detachable mounting system and that your sight, rest, and other accessories allow proper installation.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use fixed-blade broadheads with the LowPro SD?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer describes the SD primarily in terms of short-arrow and vane clearance rather than the Slim series' specific mechanical-broadhead hood design. Always verify the dimensions and fit of your exact broadheads before use.\u003c\/p\u003e\n\n\u003ch3\u003eWill the SD work with large or high-profile vanes?\u003c\/h3\u003e\n\u003cp\u003eThe shortened design provides improved clearance around the lower retention arm, but clearance is not guaranteed for every vane height or fletching configuration. Check the actual finished arrows after installing the quiver.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the LowPro SD include arrows or broadheads?\u003c\/h3\u003e\n\u003cp\u003eThe LowPro SD is sold as a quiver accessory. Arrows and broadheads are not advertised as included.\u003c\/p\u003e\n\n\u003ch3\u003eWhere can I buy the Mathews LowPro SD Quiver?\u003c\/h3\u003e\n\u003cp\u003eExplore Mathews accessories at Extreme Outfitters or contact our archery team in Jacksonville, North Carolina, for help with arrow measurements, compatibility, and availability.\u003c\/p\u003e\n\n\u003ch2\u003eExplore More Mathews Quivers and Accessories\u003c\/h2\u003e\n\n\u003cp\u003eThe LowPro Short Draw Detachable Quiver offers a purpose-built solution for archers using shorter hunting arrows.\u003c\/p\u003e\n\n\u003cp\u003eBrowse our \u003ca href=\"\/collections\/mathews-archery\"\u003eMathews Archery collection\u003c\/a\u003e for compatible accessories, or explore our \u003ca href=\"\/collections\/hunting-bow-quivers\"\u003ehunting bow quivers\u003c\/a\u003e to compare additional models.\u003c\/p\u003e\n\n\u003cp\u003eYou can also explore our \u003ca href=\"\/collections\/bow-accessories\"\u003ebow accessories\u003c\/a\u003e collection when building or upgrading your complete hunting setup.\u003c\/p\u003e\n\n\u003ch2\u003eComplete Your Short-Draw Hunting Setup\u003c\/h2\u003e\n\n\u003cp\u003eChoosing the right quiver is about more than matching a bow model. Arrow length, fletching placement, broadhead clearance, mounting compatibility, and the balance of the finished bow all need to be considered.\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eExtreme Outfitters\u003c\/strong\u003e, our archery pro shop in Jacksonville, North Carolina, helps bowhunters choose compatible accessories and build equipment around their individual shooting requirements.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReady to upgrade?\u003c\/strong\u003e Select your hood finish and handedness, confirm that your arrow tip-to-vane measurement falls within the supported range, and add the Mathews LowPro Short Draw Detachable Quiver to your cart.\u003c\/p\u003e\n\n\u003cp\u003eNeed help determining whether the SD or standard LowPro is the correct quiver? Contact our archery team at \u003ca href=\"tel:9103552118\"\u003e910-355-2118\u003c\/a\u003e for assistance.\u003c\/p\u003e\n","brand":"Mathews Archery","offers":[{"title":"Right Hand \/ Kodiak","offer_id":53033989636327,"sku":"37337|Right Hand|Kodiak","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Right Hand \/ Sage","offer_id":53033989669095,"sku":"37337|Right Hand|Sage","price":259.99,"currency_code":"USD","in_stock":true},{"title":"Right Hand \/ MO Fall Foliage","offer_id":53033989701863,"sku":"37337|Right Hand|MO Fall Foliage","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Right Hand \/ MO Bottomland","offer_id":53033989734631,"sku":"37337|Right Hand|MO Bottomland","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Right Hand \/ Ambush","offer_id":53033989767399,"sku":"37337|Right Hand|Ambush","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Left Hand \/ Kodiak","offer_id":53033989800167,"sku":"37337|Left Hand|Kodiak","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Left Hand \/ Sage","offer_id":53033989832935,"sku":"37337|Left Hand|Sage","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Left Hand \/ MO Fall Foliage","offer_id":53033989865703,"sku":"37337|Left Hand|MO Fall Foliage","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Left Hand \/ MO Bottomland","offer_id":53033989898471,"sku":"37337|Left Hand|MO Bottomland","price":259.99,"currency_code":"USD","in_stock":false},{"title":"Left Hand \/ Ambush","offer_id":53033989931239,"sku":"37337|Left Hand|Ambush","price":259.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/9704\/0359\/files\/37337.jpg?v=1794416451","url":"https:\/\/extremeoutfitters.com\/products\/mathews-lowpro-short-draw-sd-detachable-quiver","provider":"Extreme Outfitters","version":"1.0","type":"link"}