UV Hinge 3 Review — What's New From UltraView and Is It Worth It?

What Is the UV Hinge 3?

The UV Hinge 3 is the latest back-tension hinge release from UltraView — the third generation of their hinge lineup. If you've shot a hinge before, you know the concept: you don't punch a trigger. You build back pressure through the shot, and when the tension is right, the release fires. It forces you to execute the shot correctly every single time.

The UV Hinge 3 is available in aluminum or brass, regular or extra large, and can be configured for two, three, or four fingers. It also pairs perfectly with the UV Button 2 if you're running a two-release system — same ergonomics, same finger bed design, same profile. You can swap between them without changing a thing on your bow.

These are made in the USA. All hardened steel internals. This is a premium release and it comes with a premium price tag — but we'll get into whether it's worth it.

What Changed From the UV Hinge 2

The Neck Is Shorter

This is the big one. The neck on the UV Hinge 3 is about 20% shorter than the previous model — roughly a quarter inch. That might not sound like a lot, but if you've ever struggled with a hinge that felt like it was just a little too long, you know exactly what I'm talking about.

Here's the thing — it doesn't change your draw length at all. That was the concern with a lot of the older generation hinges. The neck was just long enough to mess with some people's setup. UltraView fixed that.

The Hook Is Repositioned Over the Middle Finger

This is a subtle change but it matters. By moving the hook more over the middle finger, you get more equal pressure across all your fingers on the release. And when you're shooting a hinge, that equal pressure is exactly what you want — it's how you get a consistent, clean break every time. The guys at UltraView worked through this with Colby, and it shows. The geometry on this thing is well thought out.

The Thumb Pad Comes Stock

The UV Hinge 3 ships with a thumb pad already on it instead of the traditional post. You can still run the post if that's your preference, but the thumb pad is now the default. The feedback from UltraView is that most shooters prefer the overall feel of the pad — and after handling it, I get it. It just feels more natural in the hand.

Travel Adjustment Is Way Easier to Read

This is one of those things you don't appreciate until you've dealt with a release that makes adjustments feel like guesswork. The UV Hinge 3 has clear indicators that tell you exactly where you are in the travel adjustment. You've got an "H" for hot — go counterclockwise to speed it up, clockwise to slow it down. Loosen the set screw, make your adjustment, and you can see exactly how much you've moved. No guessing. Easy to get back to zero if you go too far.

Click-to-Fire Speed Uses Swappable Hooks

This is a big upgrade over the previous model. On the UV Hinge 2, you could adjust click-to-fire manually — but we're talking thousandths of an inch. It was hard to set and even harder to get back to exactly where you were. On the UV Hinge 3, UltraView solved that by using interchangeable hooks.

The release comes stock with a 28-thousandths click. You can also get 24, 20, 16, or no click. You swap the hook, you're done. Every hook is precise and consistent — no more micro-adjusting a set screw and hoping for the best.

Those hooks are sold separately. You get the 28-thousandths stock. If you want other speeds, you'll need to buy them. Same goes for your different finger attachments. But most shooters — especially if you're new to a hinge — are going to be fine starting with the 28 and working from there as you get more comfortable.

How Does It Actually Feel?

The design on this thing is really good. Thin, low profile, fits the hand well. The knurling in the finger beds gives you just enough grip without feeling aggressive. The three-finger setup felt natural right away.

The click itself is smooth. Some cheaper releases have a click that feels jerky — almost like the whole release hiccups when it fires. That's not what's happening here. The UV Hinge 3 has that premium, clean break that tells you the shot happened without rattling your hand. That consistency matters. When you get to the click, it needs to feel the same every single time.

The brass version has a slightly heavier feel that a lot of hinge shooters prefer — there's just something about it in the hand. But the aluminum is a solid option too and shaves a little weight if that matters to your setup.

Who Is This For?

If you're brand new to hinge releases, this is a great one to start on. UltraView recommends starting with the stock 28-thousandths hook and working your way from there. The adjustment indicators make it easy to dial in without going down a rabbit hole.

If you're already running the UV Hinge 2 and it's working for you, the upgrade is a nice step up — especially if the neck length was ever an issue, or if you want cleaner adjustment options. The swappable hook system alone is worth it if you like to experiment with click-to-fire speed.

If you're running two releases — a hinge in the offseason and a thumb button during hunting season — the UV Hinge 3 and UV Button 2 are basically made for each other. Same ergonomics, same feel, no transition awkwardness between the two.

The Bottom Line

UltraView has been refining this hinge for three generations now, and the UV Hinge 3 shows it. The ergonomics are excellent, the adjustments are intuitive, and the internals are built to hold up long term. Hardened steel hook and ledge means you're not going to start seeing inconsistency as the release wears — that's a real problem with cheaper releases and it's not something you'll deal with here.

A quality release is an investment. It's the thing between you and the bow, and it matters. If you're ready to step into a premium back-tension hinge — or upgrade what you're already running — the UV Hinge 3 is a no-brainer.