Shrewd Angled Disconnect 8 Degree

Shrewd Archery Quick Disconnect — Angled (8°)

Sometimes a straight stabilizer mount isn't what your setup calls for. The Shrewd Archery Quick Disconnect (8°) gives you the same tool-free convenience and CNC-machined precision as the standard disconnect — with an 8-degree downward angle that lets you fine-tune your stabilizer's position, correct bow torque tendencies, or dial in balance without changing stabilizer weights. Machined from 6061 aluminum, built with a 1" outside diameter for a flush fit with all Shrewd compound stabilizers, and made in the USA. When your setup needs a little more than straight-out, this is the answer.

Key Features of the Shrewd Quick Disconnect — 8°

8° Angle for Setup Tuning Flexibility

The 8-degree angle on this disconnect gives you downward offset from your bow's stabilizer bushing. This is commonly used to adjust the balance point of the bow — shifting weight forward and slightly down can help counteract a bow's tendency to pitch forward or compensate for cant, and it gives you an easy mechanical way to tune your bow's hold characteristics without changing weights. For serious tuners, this level of control matters.

CNC Machined 6061 Aluminum

Same construction as every piece of Shrewd hardware — machined from 6061 aluminum for the durability and precision that anodized plastic and cast parts can't touch. Lightweight without being fragile, corrosion-resistant without any additional maintenance required.

Durable Anodized and Cerakote Finishes

Standard color options feature a hardened anodized finish. The Flint, Terra, and Timber colors use an ultra-durable Cerakote finish — the same coating used on firearms — which holds up better in the field than standard anodizing and matches popular Mathews bow finishes exactly.

1" Outside Diameter — Flush with Shrewd Stabilizers

Designed to sit flush with all Shrewd compound stabilizers. The 1" OD eliminates the awkward step-down look you get when you run a mismatched disconnect on a premium stabilizer. Everything lines up the way it should.

Includes All Necessary Hardware

Ships complete with a matching barrel nut and the correct mounting bolt. No extra parts needed.

Made in the USA

CNC machined domestically. Built to the same standards as Shrewd's stabilizer lineup.

Who the Shrewd Quick Disconnect 8° Is Built For

• Archers who want to tune their bow's balance and hold characteristics using stabilizer angle
• Bowhunters who prefer a slight downward angle on their front stabilizer to settle the pin and reduce perceived bow weight
• Shooters building a matched Shrewd system who want color-coordinated hardware throughout
• Anyone replacing a worn or undersized disconnect with a precision-machined upgrade

Shrewd Quick Disconnect — 8° Specifications

Available Colors (8°)

Why Extreme Outfitters Recommends the Shrewd Quick Disconnect 8°

The 8-degree disconnect is the one we recommend when a customer is trying to fine-tune their bow's balance without adding weight. It's a simple, effective way to shift the bow's attitude at full draw — and Shrewd's version is as well-made as any hardware we carry. The Cerakote finishes in particular are impressive: they match Mathews colorways tightly and hold up in conditions that would scratch or chip most anodized hardware.

If you're building a Shrewd stabilizer system and you want everything to match, this is the 8-degree disconnect to run.

Frequently Asked Questions — Shrewd Quick Disconnect 8°

What does the 8° angle actually do for my setup?

The 8-degree downward angle shifts the weight of your stabilizer slightly forward and down relative to a straight mount. This changes the bow's balance point at full draw and can help correct a bow that's pitching forward, reduce felt tip-forward torque, or simply improve your natural hold. It's a tuning tool as much as it is a mounting component.

How is the 8° different from the 0° (straight) or 20°?

The 0° is the standard straight mount — no angle offset. The 8° provides moderate downward angle for tuning flexibility. The 20° is an extreme angle used in specialized target setups and is only available in Gloss Black. For hunting and most compound setups, the choice is between 0° and 8° depending on whether you want angled offset or not.

Will the 8° disconnect fit my bow?

Yes, if your bow uses a standard 5/16"-24 front stabilizer bushing — which covers virtually all compound bows on the market. The included 5/16"-24 x 3/4" socket head cap screw installs directly.

What is the difference between the anodized and Cerakote finish options?

Standard colors (Matte Black, Gloss Black, and accent colors) use a hardened anodized finish. Flint, Terra, and Timber use Cerakote — a polymer-ceramic coating that is more abrasion and corrosion resistant than standard anodizing. The Cerakote options also match Mathews bow finishes directly.

Is the 8° available in all colors?

The 8° is available in all color options except the 20°-exclusive Gloss Black. All accent colors (Red, Blue, Orange, etc.) are available in 0° and 8° only. The 20° option is Gloss Black only.

Does this include everything I need to install it?

Yes. The Shrewd Quick Disconnect ships with a matching barrel nut and a 5/16"-24 x 3/4" socket head cap screw. No additional hardware is required.

Sizing & Compatibility

The Shrewd Quick Disconnect 8° is compatible with all compound bows using standard 5/16"-24 front stabilizer threads. Outside diameter is 1" for a flush fit with all Shrewd compound stabilizers. Also compatible with most non-Shrewd stabilizers using the same thread standard.

If you need a straight mount, see the Shrewd Quick Disconnect Straight (0°) listed separately. For the most extreme angle, the Shrewd Quick Disconnect is also offered in 20° (Gloss Black only).