Shrewd Archery TRAK 12in Hunting Stabilizer World-Stage Technology Built for the Woods
Shrewd Archery has spent years engineering stabilizers trusted by the world's top competitive archers. Now, that same tunable technology has been refined and purpose-built for bowhunters. The Shrewd TRAK 12in Hunting Stabilizer brings competition-grade dampening and precision to the field — available in four lengths and six finish options to match your setup perfectly. If you demand a dead-quiet, rock-solid bow at full draw, the TRAK was built with you in mind.
Key Features of the Shrewd TRAK 12in Hunting Stabilizer
Mass Damper System
The TRAK's Mass Damper System is what separates it from every other hunting stabilizer on the market. The suspended weight stack is isolated from the stabilizer body using elastomeric pads, allowing the weights to move independently and absorb vibration and noise before it ever reaches your hand. The result is a noticeably quieter, smoother shot — exactly what you need when a mature buck is standing at 30 yards.
BEAM Carbon Construction
The TRAK is built around Shrewd's proprietary BEAM Carbon — an indexable carbon shaft featuring parallel grooves that optimize both dampening and stiffness. Unlike typical high-modulus carbon, the BEAM uses standard modulus carbon in a structural profile that delivers built-in vibration dampening while maintaining the rigidity you need for consistent hold. It outperforms high-modulus carbon where it matters most: in the field.
Indexable Orientation System
Fine-tuning your stabilizer's orientation has never been simpler. The TRAK features an easy-to-use positioning system built directly into the mounting stud, allowing you to dial in the exact angle and orientation of your stabilizer without additional tools or guesswork. Set it, lock it, and hunt with confidence.
Customizable Weight Stack
Every TRAK ships with a complete, field-ready weight and damper stack. The included components give you immediate out-of-the-box performance while also providing flexibility to fine-tune total weight to your preference. The 5/16”-24 threaded system is compatible with standard aftermarket weights.
Available in Multiple Lengths and Finishes
The TRAK is offered in 8”, 10”, 12”, and 15” lengths so you can match it to your hunting style — whether you're navigating tight treestand setups or shooting from a ground blind with room to stretch out. Six color finishes are available, including options specifically matched to popular Mathews bow colorways.
-
Shrewd Terra matches Mathews® Green Ambush
-
Shrewd Dust matches Mathews® Earth
-
Shrewd Flint matches Mathews® Shale
-
Shrewd Timber matches Mathews® Kodiak Brown
Who the TRAK Hunting Stabilizer Is Built For
The TRAK isn't a stabilizer for someone who just wants to check a box. It's built for the serious bowhunter who has put in the off-season work, demands consistency from their equipment, and won't settle for a mediocre shot when it counts.
It's ideal for:
- Whitetail hunters who need maximum vibration reduction for silent setups
- Western hunters packing into the backcountry who want a purpose-built hunting stabilizer with real performance engineering
- Bowhunters who hunt under bowhunter class rules and need a stabilizer with a measured, compliant length
- Archers transitioning from the target range to the field who don't want to compromise on quality
Note: All TRAK stabilizer lengths are measured from the bow end cap to the end of the included weight and damper stack, ensuring compliance with bowhunter class rules and regulations.
Shrewd TRAK Hunting Stabilizer Specifications
| Length |
Weight (oz) — Body Only |
| 8” |
3.8 oz |
| 10” |
4.1 oz |
| 12” |
4.6 oz |
| 15” |
5.2 oz |
Body weight includes the carbon and end caps but does not include the weights or rubber dampers.
Included Weight Stack & Damper Details
| Component |
Weight |
| Threaded Suspension Damper |
1.1 oz |
| Suspension Dampers (x2) |
0.33 oz |
| 0.5 oz Stainless Steel Weight |
0.5 oz |
| 1 oz Weight with Color Damper |
1.25 oz |
| 5/16”-24 x 2.5” Threaded Rod |
0.67 oz |
| Total Weight Stack |
3.8 oz |
What's Included in the Box
- (1) 1 oz Black Stainless Steel Weight with Black Color Damper
- (1) 0.5 oz Black Stainless Steel Weight with 5/16”-24 Threads
- (2) Suspension Dampers
- (1) Threaded Suspension Damper
- (1) 2.5” x 5/16”-24 Threaded Rod
- (1) 1/16 Hex Key
- (1) Spare Index Locking Screw (stored in the mounting stud)
- (1) Storage Case
Available Colors
- Blackout
- Bottomland
- Dust
- Flint
- Terra
- Timber
- Whiteout
Why Extreme Outfitters Recommends the Shrewd TRAK 12in Hunting Stabilizer
We stock a lot of stabilizers at Extreme Outfitters. Most of them do the job. The TRAK does it better.
What stands out about the TRAK is that Shrewd didn't just slap a hunting finish on a target stabilizer they went back to the drawing board and engineered something purpose-built for the demands of bowhunting. The Mass Damper System is genuinely effective at what it's designed to do, and the BEAM Carbon construction gives you stiffness and built-in dampening in a single package that most hunting stabilizers can't match.
The indexable mounting system is a detail that sounds small until you actually need to adjust orientation in a tight treestand and it takes you 30 seconds instead of 10 minutes. That's the kind of real-world thinking we appreciate in gear we recommend.
If you're serious about your bow setup and you're tired of hunting stabilizers that are more marketing than performance, the TRAK is worth every penny.
Frequently Asked Questions — Shrewd TRAK Hunting Stabilizer
How is the TRAK's length measured?
TRAK stabilizer lengths are measured from the bow end cap to the end of the damper and weight stack. This method includes the full weight stack in the measurement to ensure the stabilizer complies with bowhunter class rules and regulations.
How does the TRAK compare to the Shrewd Vantage hunting stabilizer?
The TRAK is the newest and most advanced hunting stabilizer in the Shrewd lineup. Compared to the Vantage, the TRAK offers superior dampening through the Mass Damper System, the ability to tune and orient the stabilizer via the indexable mounting system, additional length options, and the latest colorways. The TRAK also runs intentionally heavier than the Vantage — that added mass is by design and directly contributes to improved damping and stabilization.
What is the total weight of the included weight and damper stack?
The total weight of the included weights, dampers, and threaded rod is 3.8 oz. This is in addition to the body weight listed in the specifications table above.
Can I add more weight to the TRAK?
Yes. The weight stack uses a standard 5/16”-24 threaded system, which is compatible with additional Shrewd weights and most standard aftermarket weights. You can add or remove weight to tune the stabilizer to your specific bow and shooting style.
What thread pitch does the TRAK use to mount to my bow?
The TRAK uses the industry-standard 5/16”-24 thread pitch for bow mounting, which is compatible with the vast majority of compound bows on the market today.
Can I customize the color damper on my TRAK?
Yes. Every TRAK ships with a black Color Damper as standard. Shrewd sells additional Color Dampers separately in a wide range of colors — including Red, Blue, Orange, Yellow, OD Green, Tan, Teal, Flint, and White — so you can match or contrast your bow's finish. A full Color Kit (all colors except white) is also available.
Does the TRAK come with a storage case?
Yes. Every TRAK Hunting Stabilizer includes a storage case, making it easy to transport your stabilizer safely between the range and the field.
Is the TRAK legal for bowhunter class competitions?
The TRAK's length is measured to include the full weight and damper stack from the bow end cap outward. This measurement method is specifically designed with bowhunter class compliance in mind, but we always recommend verifying your specific tournament or regulatory rules before competing.
Sizing & Compatibility
The Shrewd TRAK Hunting Stabilizer is available in four lengths to suit a variety of hunting applications:
-
8” — Ideal for tight treestand situations or any setup where a shorter profile is preferred
-
10” — A versatile all-around hunting length for most setups
-
12” — Increased stabilization for hunters who prefer a longer stabilizer in open ground blind or spot-and-stalk situations
-
15” — Maximum stabilization for open country hunting or hunters seeking the most hold possible within bowhunter class rules
The TRAK mounts using a standard 5/16”-24 threaded stud and is compatible with virtually all compound bows. Available in Blackout, Bottomland, Dust, Flint, Terra, Timber, and Whiteout finishes.
